As part of the revision works superheater made from “VM12” were installed by IMR Hamburg d.o.o. staff superheater from VM12, coal burners de-and re-installed and supports to the TÜV program where given. Work is from June to August 2013.
Extensive modifications to the boilers were executed by mirror welders of IMR. In predicaments, cramped conditions and high summer temperatures in beginning June of 2013 top performance was delivered at the boiler drum.
February 2013: IMR has successfully finished an order for Modification of high pressure pipe works in the turbine building on the project Duisburg Walsum Unit 10 for the customer Hitachi Europe and under the Supervision of Hitachi Ltd. The order contains piping modification on systems like LBQ high pressure extraction steam material 1.7335 dimensions OD 700 x WT 30, OD 610 x WT 40, OD 457 x WT 10, LBC hot reheat steam piping material 1.5415 dimensions OD 273 x WT 14.2 and the LCH drain piping from high pressure heater material 1.7380 OD 273 x WT 20. The contract contains additionally the reinstallation and new installation of the isolation and the paint. The complete order has been worked out with personal of the IMR HAMBURG GmbH and her subsidiary companies in eastern Europe as well as own supervision with the welder failure rate of 0%.
Since 2010 it has been in the HP piping area on the pipeline projects Walsum10, CFPP GDF Suez Wilhelmshaven and Rotterdam built a total of about a thousand tons of high pressure piping spools plus LISEGA support erection success. Notable systems, partially prefabricated spools whose prefabrication have been increased in balanced erection by IMR assembly concept further, are HAD Auxiliary steam to Economizer 1.4903 273×28, MAA fresh steam to turbine 1.4901 519×108, MAB and MAP (NDU) Hot Reheat 1.4901 486×36 and 1.4903 914×16, and MAW gland steam and LAB feed water in different materials and dimensions.
Since the start of the CFPP Walsum unit 10 piping project in 2007 IMR was searching for a good solution to manage piping data within the work planning, material handling, erection and quality assurance phases. After some tests with other software it was found that INTERGRAPH provides already proven software within the SMART PLANT tool group
Interfaces for SAP and all 3D CAD software used in the business that run on Isogen or Isodraft files can be handled. To read some details of the software implementation process and experiences please feel free to follow this Link.
In CW04-2012 IMR continued to invest in workplace safety. 20 extra men of the operational staff in theory and practice have been trained, tested and certified with the support of our partner GARDEMANN according to the IPAF guidelines as a lifting platform operator. Scissors and swivel arm manlifts (so called “cherry pickers”) are used in many areas and involve numerous risks. Through the observance of basic operating instructions, most hazards are reduced to virtually zero. Emergency lowering and other maneuvers were practiced by each participant which gives confidence in dealing with the devices.